Zinc primer for steel reinforcement

technical data sheet

• Active zinc-rich system combats corrosion by electrochemical means; 
• Touch dry after 15-45 minutes.

 Rapid setting plugging mortar

technical data sheet

• 1 minute setting time at 20° C;
• Chloride free horizontal and vertical plugging mortar;
• Instant water stopping ability.

Rapid setting plugging mortar

technical data sheet

• 1 minute setting time at 20° C;
• Chloride free horizontal and vertical plugging mortar;
• DWI approved.

General purpose repair mortar

technical data sheet

• Shrinkage compensated;
• Use with Nitobond AR/HAR;
• 28 N/mm2 compressive strength

 Cementitious fairing coat

technical data sheet

• Setting time 30 minutes to 1 hour;
• Excellent bond to concrete substrates;
• Blow/pin hole filler.

High build repair mortar

technical data sheet

• Polymer modified mortar for areas up to 80 mm build;
• Compressive strength 22 N/ mm2;
• Use with Nitobond AR/HAR.

 Lightweight mortar for large repair areas

• Compressive strength 23 N/mm2;
• Can be applied by wet spraying;
• High build.

Reinstatement mortar for large repairs

technical data sheet

•  Compressive strength 40 N/mm2;
• Up to 40 mm thickness in one application;
• Polymer modified .

Free flowing repair mortar

technical data sheet

• Thickness 50mm-150mm;
• Coverage: 12 ltrs per bag;
• Compressive strength 55 N/mm2.

 High strength repair mortar

technical data sheet

• Thickness 5mm-100 mm;
• Coverage 12 ltrs per bag. Use with Nitobond EP;
• Compressive strength 55 N/mm2.

 Fast setting emergency patching mortar

• Will accept traffic in 2 hours;
• Thickness 12mm-100mm;
• Coverage 12 ltrs per bag - Use with Nitocote EP.

 Shrinkage compensatedrepair mortar

technical data sheet

• Thickness 12mm-100mm;
• Coverage: 12 ltrs per bag - Use with Nitobond EP;
• Will accept pedestrian traffic within 12 hours.

 Epoxy resin injection grout for cracks

technical data sheet

• Permits maximum resin penetration;
• Ideal for cracks from 0.25 mm to 9 mm wide;
• Use with Nitokit surface sealant.

• Permits maximum resin penetration;
• Ideal for cracks from 0.25mm to 9 mm wide;
• Use with Nitokit surface sealant

• Low viscosity system suitable for cracks down to 0.2 mm at the surface and internal cracks tapering down to 0.01 mm;
•  Ideal for small scale repairs on site and are also suitable for insitu or precast concrete elements.

Pre-packaged thixotropic epoxy crack injection systems

technical data sheet

• Thixotropic system, injected into open ended cracks where depth and quantity of resin need to be controlled;
• Ideal for small scale repairs on site and are also suitable for insitu or precast concrete elements;

• Scrape & blow hole filler;
•  Makes good prior to coating.

• Compressive strength 40 N/mm2;
• Highly chemically resistant;
• Time saving lightweight formulation.

 High strength epoxy repair mortar

technical data sheet

• Compressive strength 70 N/mm2;
• Suitable for heavily trafficked areas;
• Use with Nitoprime 25 & 28.